• 1 grinding and polishing step
• Very efficient as reusable 
• From grind 400 / 800 with marble / terrazzo
• From grind 3500 for granite 
• Result: natural polish!
• pH-neutral
• Cleaner for materials with micropores , e.g. satined glass (frosted glass), polished fine stone, ceramic and glass tiles, stainless steel 
• Cleaner for film residues (plasticizer and anti-aging protection), e.g. on ceramic tiles 
• Cleaner for tiling pattern residues  
• Cleaner for resin-coated tiles and natural stones 
• Polishing of discolourations with badly polished fine stoneware tiles, grinding / polishing machine (at least 120 kg) 
• Surface tension is preserved 
• Freshening up of the polish on highly frequented surfaces only necessary 1 to 2 times a year. Does not need to be covered! 
• Crystalising: weekly in normal cases, with silicic acid and steel wool. Needs to be covered!

Application sheet Finalit No. 60 Grinding-Polishing Powder

Security data sheet Finalit No. 60 Grinding-Polishing Powder

Application

• 1 kg is sufficient for 300 m², reusable!
• Thoroughly clean the surface to be polished.
• Only use Finalit No. 60 Grinding-Polishing Powder as a sludgy paste-like mass, i.e. with water added! Never use dry!

When polishing with Finalit No. 60 Grinding-Polishing Powder, fine scratches and etched spots are removed by the grinding components. Always store  polishing pads / felt pads in a clean place, as dust contains sand particles that, due to their hardness, can damage (scratch) the surface. This also applies to the powder itself!

Pro Tips

Using Finalit No. 60 Grinding-Polishing Powder, work in using a heavy single-disc machine (weight: 60 - 80kg) with moderate speed (up to 240 rpm). The 
single-disc machine can be loaded additionally with sandsacks (20 kg) or weights.

• Version – polishing marble, granite and fine stone tiles: use a heavy machine (weight: 100 - 140 kg, preferably with a planetary drive, thus 3 opposite rotating discs) and white plastic pads.
• ATTENTION! The grinding / polishing powder must always be under the machine (white pad or felt).

Example:

MARBLE:
for scratches and etched spots: grind with 60/120/220/400 (also with 800 for some soft stones) and then with single-disc machine with white nylon pad or felt pad 
or steel wool 00 and polish to high gloss with grinding / polishing powder 

GRANITE and FINE STONE TILES:
Removing scratches:
a) grind with 60/120/220/400/800/1.500/3.500 using heavy grinding / polishing machine (min. 120 kg) 
b) polish using white nylon-pad or felt pad or steel wool 00

ADVANTAGE
Grinding and polishing effect in one step.    * With soft stones from grind 400 or 800, with hard stone from grind 800, 1,800 or 3,500

• Result: natural polish!
• pH-neutral
• Reusable 
• Excellent cleaner for materials with micropores , e.g. patinated glass, polished fine stone, ceramic and glass tiles, stainless steel 
• Excellent paint-polishing powder (car paint)!

CLEAN USING A MACHINE ONLY FOR:

• Glass 
• Aluminium 
• Nirosta (stainless steel)
• Brass 
• Wood 
• Car paint (by hand using a white plastic pad, do not use a machine due to the heat development)

CLEANING OF: 

• Glass-ceramic plates
• Patinated glass 
• Sand-blasted glass 
• Joint edge discolouration with very fine pored materials, e.g. fine stone tiles

IMPORTANT! Work with a sludgy paste-like mass!!

By hand - using a white synthetic pad - or using a hand machine