You have no items in your shopping cart.
Products
-
Finalit N. 7 Graffiti-Paint-Remover (acidic)
from€76.80Incl. 20% Tax- Removes graffiti, graffiti on vehicles, graffiti on traffic signs,
- residues of adhesives, lacquer and varnish, adhesive film, car lettering,
- carpet and wallpaper adhesive, discolourations from felt-tipped pens, pencils.
-
Finalit No. 7+ Radical-Graffiti-Paint-Remover (acidic)
from€36.00Incl. 20% Tax- Intensive remover for graffiti, also for porous surfaces,
- epoxy resin, paint residues, paint, nail varnish,
- general adhesive residues, silicone, tar, ink, chewing gum,
- wall paper including adhesives, marker, felt-tipped pens, pencils;
- do not use on asphalt, it will turn yellow.
Short video Finalit No. 7+ Radical Graffiti and Paint Remover
-
Finalit No. 8 Rust Solvent (acidic)
from€24.00Incl. 20% Tax- Removes rust stains, copper patination and yellow stains in Carrara marble.
- Excellent basic cleaner for stubborn stains.
- Crystal water stain remover. Colour stains from fertiliser.
- Resin remover / shellac if No.5 is not sufficient.
- No rusting, rust particles are coated.
Can be diluted up to 1:5 with water depending on the degree of soiling. 1 l is sufficient for 20 m².
-
Finalit No. 9 Lime and Cement Bloom Remover (acidic)
from€20.40Incl. 20% Tax- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for terracotta and fine stoneware.
- Extremely powerful basic cleaner.
-
Finalit No. 10 Algae and Moss Killer (acidic)
from€20.40Incl. 20% Tax- For controlling algae, moss, verdigris and mildew.
- High disinfection ability. Kills off all spores and moulds.
-
Finalit No. 11 Grease and Wax Remover (neutral)
from€24.00Incl. 20% Tax- Removes stains of grease, milk, oil,
- wax, candle wax, food waste and grease rims of silicone joints.
Use undiluted. 1 l is sufficient for 5 m²..
-
Finalit No. 12 Stain Killer (basic)
from€24.00Incl. 20% TaxSpecial stain remover for particularly stubborn stains from
- mould, cola drinks, tea, coffee, red wine, honey, fruit juice, ink, and many more.
- Bleaching function for colour residues ("shading") (e.g. graffiti and algae residues).
Can be diluted up to 1:5 with water depending on the degree of soiling. 1 litre is sufficient for 20 m².
-
Finalit No. 20 Hot Impregnation
from€57.60Incl. 20% Tax- Long-term protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Tested by the MA 39 Testing and Research Institute of the City of Vienna.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
-
Finalit No. 21 Fixative Penetrating Stopper
from€22.80Incl. 20% Tax- Pre-treatment of ABSORBANT MATERIALS, such as granite, marble, tiles, porphyry, and many more before applying Finalit impregnations.
- Colour enhancer.
- Pre-treatment when floor heating is installed.
- Pre-treatment before laying and jointing. Jointing aid. Hardener. Bonding agent.
- The temperature of the object must be above +10°C.
-
Finalit No. 21S Pores Filler (water-based)
from€28.80Incl. 20% Tax- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.